Steering for Chaparral,Glastron, Scarab and SeaDoo With Rotax / 4tec engines

Description

Cobra Jet Steering for Single or Twin Engine
for
Chaparral, Glastron, Scarab and SeaDoo
Jet Boats
This steering increases your fun and control at all speeds. This
Patented
Steering has been improving the jet boat experience since 2001 with thousands of satisfied customers!
With our Cobra Jet Steering system for ROTAX engines/pumps and Sea-Doo 4-TEC engines you will be able to spend your time in the boat enjoying it rather than worrying about its lack of control.  This simple, affordable, and easy to install system can make your boating experience a more relaxed and pleasurable one.  Our stainless steel steering units were specifically designed to fit the nozzles of Sea-Doo jet boats and other makes equipped with the 4-TEC engines.
These systems will help fill in the voids of jet boat steering without taking away from the jet boat experience.  You can expect instant response in the steering while operating at slow speed, which is especially helpful when docking or loading on the trailer.  You will also have feedback in the steering at speed, turning will be more precise, and towing tubes, wake boards, skiers, etc. will be more controlled when using our steering.  Cobra Jet Steering sets are compatible with both single engine and twin engine boats. ONE SET WORKS ON EITHER SETUP!
This time proven system provides the correct amount of added influence to allow you to enjoy your jet boat with added confidence and control.  We chose to stay with this system for many years simply because it works so well and is very cost effective with no negative side effects like cancelling out the reverse control of the boat.
Remember that the nozzles turn the opposite on a 4-TEC pump so the fins on a nozzle can cancel the reverse control quite easily.  Remember you are turning your steering wheel the wrong way in reverse.  We designed the fins to be partially blocked by the reverse bucket when you are in reverse to address this problem.
We also continue to use very small stainless steel button cap screws to attach the fins to the nozzles.  The 4-TEC nozzles are very strong, so the small 3/16" holes for the screws will not harm the nozzle.  This keeps the profile of the mounting of the fins on the nozzle at a minimum.  This avoids causing extra drag or creating water spray behind the boat even when the fins are working at high speed and during water sport activities.  Remember this also improves high speed handling so pulling tubes or skiers will be very easy.
This system will transform your boat and make it even more fun to operate, and do it at a very affordable price.
Lastly, adding this system to your boat will NOT void your warranty.  In all the years I have done this I have never had one of these nozzles fail due to adding the fins or have any warranty issue arise.
It is reliable and effective.
.
The price includes the steering parts, and hardware. This will not void your factory warranty
This steering is protected by Two US patients 6561858 and 6702630
Shipping Includes Lost Package Insurance and Delivery Confirmation.