Mopar Chrysler Dodge Big Block 383 400 440 Engine Block Pipe Plug Kit USA Made!!

Description

When we first started building our own Big Block Mopar engines, we found there were all kinds of pipe plug fittings around the engine that we were always trying to scrounge up the correct plugs for from the bottom of a drawer somewhere, or having to make a trip to the local hardware store to find. So we decided to put together a convenient kit which includes every single one of the ten pipe plugs you will need for the entire outside of the engine. This kit includes the following plugs:
1. The plugs for both oil galley ports in the top rear of the block. Normally one of these ports would be used for an oil pressure sending unit, but depending on the type of sending unit you are using, the size of thread can vary. So we include both sizes so you'll be sure to have the one you need.
2. The plug which covers the port into which the fuel pump pushrod is installed.
3. Four plugs for the ports in our (and others) aftermarket aluminum water pump housings. Two of these ports would normally be used for heater hoses, and the other two are for temp. sending units. One is large and one is small, depending on the type of temp sending unit you are using, and whether it is for a light or a gauge. Again, we include both sizes so you'll be sure to have the one you need.
4. The 2 coolant drain plugs at the lower edge of the outside skirt of the block (below the freeze plugs.) One is on the drivers side of the block, the other is on the passenger side. These are located at the lowest point of the water level in the blocks water jackets, (near the oil pan) so they come in handy if you need to fully drain the coolant out of the block.
5. And finally, most aftermarket intakes (Edelbrock, etc) include a vacuum port in the top of the intake for power brakes, etc. Just in case you're not using this port, we include the plug for it also.
Four internal oil galley pipe plugs will also be needed, they are included with the freeze plug kits.
And, FREE SHIPPING!!
Buy with confidence! 440 Source has been on ebay since May 1st, 1999! We are the Big Block Mopar parts experts. We've sold over 33 MILLION DOLLARS of Big Block Mopar parts, we know this engine backwards and forwards. Take a look at our web store for every big block part you could possibly need!
Keywords: Chrysler Corporation Mopar Dodge Plymouth 1969 69 1970 70 1971 71 1972 72 1973 73 1974 74 1975 75 1976 76 1977 77 1978 78 Dart Valiant Barracuda Cuda Challenger Demon Scamp GT GTS Polara Suburban Custom Sport Three Hundred Satellite & Sebring Plus, Belvedere I II III VIP Monaco GTX Super Bee Rallye Charger SE Coronet 440 500 Savoy Crestwood Aspen, Volare, Road Runner, Super Coupe, Super Pak, Duster, Cordoba, New Yorker, Gran Fury.
Charger Cuda GTX SuperBee RoadRunner Coronet R/T Satellite Belvedere Daytona SuperBird Dart Swinger GT Duster Demon Fury Polara Newport NewYorker Chrysler300 Monaco Valiant Scamp Signet Dodge Plymouth Mopar Chrysler
273, 318, 340, 360, 383, 413, 426 Wedge, 426 Hemi, 440 engines, blocks, crankshafts, heads, intakes for Chrysler, Dodge, Plymouth GTX, Road Runner, Charger R/T, Duster, Dart Sport, GT, GTS, Demon, Barracuda, 'Cuda, Challenger R/T, Coronet 500, R/T, Sport Satellite, Sport Fury, Belvedere, Superbird, Daytona Valiant Dart Barracuda Belvedere Coronet Charger Satellite Road Runner GTX R/T Superbee Cuda Challenger Plymouth Dodge Chrysler Imperial Dodge truck and Jensen Intercepter. Dodge Charger Roadrunner plymouth GTX  Supercharged Turbocharged DFI ECU ECM High rise Race Drag fuel injection fuel injected mopar Chrysler blown