Hydraulic Steering Cylinder Seal HS5157 & Bracket Puller& Bleed Kit for Seastar.

Description

eBay
Hydraulic Steering Cylinder Seal HS5157 & Bracket Puller& Bleed Kit for Seastar.
APPLICATION:
①Bleed Kit - For Seastar hydraulic steering systems. ②Bracket Puller fits SeaStar and Uflex support brackets, including older style SeaStar Tournament brackets.③HS5157 kit fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755
FUNCTION:
①Used for refilling your boat's steering system fluid. One person easily controls the bleed process from end to end.②Puller helps safely remove SeaStar and Uflex support brackets. ③Replacement front seal kit for SeaStar pivot / front mount cylinders. Used to repair leaking or weeping cylinder seals.
BENEFITS:
①Changing out fluid bottles is quick and clean. Entire steering system remains sealed during the bleed process from end to end, ensuring that fluid goes where it is supposed to go!②Designed to minimize damage to the steering bracket during removal process. Works great while minimizing ugly gouges and scrapes on your brackets.③Failure to replace a damaged steering cylinder will result in seal failure and possible loss of steering.
QUALITY:
①Our bleed kit is easy to attach and use. The bridge tube now comes with hose clamps for a perfect fit.②Puller - High strength forged steel with black oxide finish. ③HS5157 - Made From High Quality Aircraft Grade Aluminum. Ensure a long life service.
PACKAGE INCLUDE:
①Bleed Kit includes 1 x hose with screw cap which fits SeaStar or equivalent oil bottles, 1 x Bridge Tube that connects to Seastar Bleed fittings.②1 x Steering Support Bracket Puller,③HS5157 kit includes 2 x Seal Glands, 1 x Seal Gland Assembly Guide Tool, 1 x Pin Holder, 8 x varies O-rings.
Using Instruction:
1. Loosening the Seal Gland. Turn the outboard hard to port; place the pin wrench in the holes of a gland. And use a 5⁄8-inch box wrench on the nut on the port end of the piston rod. (NOTE:Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland)
2.Removing the Support Bracket. Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. (Do the same to the piston rod nut and washer. ) Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket.
3. Use the pin wrench to remove the Old Seal Gland.
4.Install the New Seal Gland. Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but don't tighten it yet. Remove the guide tool; it is not part of the final assembly, but you will need it for the other side.
5. Reinstall the Support Bracket. Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently.
6. Tightening the New Seal Gland. Use the pin wrench to tighten the new seal gland while using a 5⁄8-inch box wrench on the starboard end of the piston rod for counter torque.
.
We accept payment via Payoneer.
.
S&H will be determined based upon the SHIP TO address.
.
Items will be shipped within 1 business day when we received payment.
.
We only ship to confirmed ebay addresses. Your ebay address MUST MATCH your Shipping address.
.
We accept 30 days return guarantee for all Items If you are unsatisfied with something you bought from us, you may send it back within 30 days of receipt, and we shall be happy to exchange or refund.
.
All returned products must be in their original condition and packaging. Unfortunately, if products have been assembled or modified, we cannot take them as returns.
.
It is important that we know when your return is expected. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit.
.
Refund will only be issued upon our receipt of the returned parcel. Please allow 2 working days for us to process with your return
.
.
Welcome to our store! We are a professional worldwide wholesale company, with our own factory located in China.
We will reply your message within 24 hours Mon-Sat, and 48 hours on Sunday
.
.
We maintain high standards of excellence
and strive for 100% customer satisfaction!
Feedback is very important to us.
.pls contact me first before you leave Neutral
or Negative
feedback. i will do my best to solve the problem, thanks!
Any question,please don't hesitate to contact us by the ebay message.