For Chevrolet SSR GMC Envoy Saab Left Right Side Front ABS Wheel Speed Sensor LH

Description

Fits:
2004-2007 Buick Rainier
2003-2006 Chevrolet SSR
2002-2009 Chevrolet Trailblazer
2002-2006 Chevrolet Trailblazer EXT
2002-2009 GMC Envoy
2002-2006 GMC Envoy XL
2004-2005 GMC Envoy XUV
2002-2004 Oldsmobile Bravada
2005-2009 Saab 9-7x
What is an ABS Sensor?
For Chevrolet SSR GMC Envoy Saab Left Right Side Front ABS Wheel Speed Sensor LH
Fits:
2004-2007 Buick Rainier
2003-2006 Chevrolet SSR
2002-2009 Chevrolet Trailblazer
2002-2006 Chevrolet Trailblazer EXT
2002-2009 GMC Envoy
2002-2006 GMC Envoy XL
2004-2005 GMC Envoy XUV
2002-2004 Oldsmobile Bravada
2005-2009 Saab 9-7x
What is an ABS Sensor
?
The
anti-lock braking system
uses an ABS sensor or wheel sensor to monitor the wheel speed and send this information to the ABS computer. The ABS computer uses this information to prevent the brakes from locking during an emergency stop. Without ABS, a wheel will automatically lock up in slippery and/or gravel-like conditions, as well as potentially experience a loss of directional control and vehicle stability.
Where are these Sensors Located?
The
ABS sensor
is typically located in each wheel hub/rotor on a four channel ABS system. Some rear wheel drive applications have the sensor mounted in the rear differential.
Features:
Built to strict quality control standards
100%
Brand New ABS speed sensor
Non-breakable
Seismic Capacity
Plugs into existing body mounted ABS harness
Drop in fit for
easy installation
1 Year Warranty
Symptoms of a Bad or Failing ABS Sensor:
The ABS Warning Light Glows
The Brakes Lock Up
An Unresponsive Brake Pedal
Increased Pedal Effort
Speedometer Failure
If any of the warning lights above are illuminated, there is brake pedal judder while braking at low speeds or the wheels lock up while braking, then there is probably a fault somewhere within the ABS system.Please replace it immediately！
How to Replace an ABS Speed Sensor
?
Materials Needed:
Brake cleaner
Jack stands
Ratchet
Sil-Glyde
Socket set
Wrench set
Install the ABS Speed Sensor:
Step 1: Gain access to the sensor
.
Step 2: Remove the sensor
.
Step 3: Take note of the sensor wire routing
.
Step 4: Clean the sensor mounting hole
.
Step 5: Clean the tone ring of all fine metal
.
Step 6: Insert the sensor into its mounting hole
.
Step 7: Route the sensor wire along the correct path
.
Step 8: Connect the sensor connector to the vehicle connector
.
Step 9: Clear the code and test drive your vehicle.
Item Specifics
Brand
everpartstorecs
Placement on Vehicle
Left
Manufacturer Part Number
10029226
OE/OEM Part Number
5S7978
Items Included
Traction Control Pressure Sensor
Color
Black
Vintage Car Part
No
Package Contents
1 x ABS wheel sensor
Interchange Part Number
SU9444
Manufacturer Warranty
1 Year
Performance Part
No
Superseded Part Number
ALS1337
Universal Fitment
No
Package Type
Box
Housing Material
Plastic
Fitment Type
Direct Replacement
Terminal Quantity
2
Mounting Hardware Included
No
weight
0.13 Kg
Finish
Polished
Item Height
5.5cm
Material
Plastic
Mounting Style
Snap-On
Width
9 cm
Number in Pack
1
Terminal Type
Mini-Blade
Connector Type
Female
Mounting Location
Spindle
Connector Quantity
1
Terminal Gender
Male
Connector Shape
Rectangular
Type
Traction Control Pressure Sensor
Shipping
1.We will ship your order within
2
working days after confirming the payment, and most areas will receive delivery within
2-8
working days.
2.All orders will be shipped from our US warehouses and delivered by
USPS
,
UPS
or FedEx.
3.We will deliver the product to the address filled in eBay, if you need to change your address,
please make sure you
tell us the new address within 12 hours after payment
(no delivery to remote areas).
4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,
if there are any problems, contact us immediately
please
.
Payment
PayPal preferred.
Other payments accepted by ebay also can be accepted.
Service
1. Products can be returned for no reason within
30
days of receipt
(products to be returned must be in a resalable condition, if they have been used we will not accept the return).
2. If the product does not match the description on the product page, we will exchange or refund the product for free
within
30
days.
3. We offer
one
year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.
Note
If you have any concerns about the product or
before
providing a review or feedback,
please contact us
immediately, we will give a satisfied solution.
Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.
STORE HOME
HOT SELLING
COOL SUMMER
SENSORS
EXTERIOR
Shop Category
Store Home
lift support
Condenser
Air Diesel Heater
Blower Resistor
Blower Motor
Heater Core
Suspension Kits
Thermostat Housing
ABS Wheel Speed Sensor
Window Switch
Oxygen Sensor
3Rd Brake Light
Mass air flow sensor
AC Compressor
Cooling Fan
Towing Mirrors
Door Handle
Roof Rack
Other
For Chevrolet SSR GMC Envoy Saab Left Right Side Front ABS Wheel Speed Sensor LH
Fits:
2004-2007 Buick Rainier
2003-2006 Chevrolet SSR
2002-2009 Chevrolet Trailblazer
2002-2006 Chevrolet Trailblazer EXT
2002-2009 GMC Envoy
2002-2006 GMC Envoy XL
2004-2005 GMC Envoy XUV
2002-2004 Oldsmobile Bravada
2005-2009 Saab 9-7x
What is an ABS Sensor
?
The
anti-lock braking system
uses an ABS sensor or wheel sensor to monitor the wheel speed and send this information to the ABS computer. The ABS computer uses this information to prevent the brakes from locking during an emergency stop. Without ABS, a wheel will automatically lock up in slippery and/or gravel-like conditions, as well as potentially experience a loss of directional control and vehicle stability.
Where are these Sensors Located?
The
ABS sensor
is typically located in each wheel hub/rotor on a four channel ABS system. Some rear wheel drive applications have the sensor mounted in the rear differential.
Features:
Built to strict quality control standards
100%
Brand New ABS speed sensor
Non-breakable
Seismic Capacity
Plugs into existing body mounted ABS harness
Drop in fit for
easy installation
1 Year Warranty
Symptoms of a Bad or Failing ABS Sensor:
The ABS Warning Light Glows
The Brakes Lock Up
An Unresponsive Brake Pedal
Increased Pedal Effort
Speedometer Failure
If any of the warning lights above are illuminated, there is brake pedal judder while braking at low speeds or the wheels lock up while braking, then there is probably a fault somewhere within the ABS system.Please replace it immediately！
How to Replace an ABS Speed Sensor
?
Materials Needed:
Brake cleaner
Jack stands
Ratchet
Sil-Glyde
Socket set
Wrench set
Install the ABS Speed Sensor:
Step 1: Gain access to the sensor
.
Step 2: Remove the sensor
.
Step 3: Take note of the sensor wire routing
.
Step 4: Clean the sensor mounting hole
.
Step 5: Clean the tone ring of all fine metal
.
Step 6: Insert the sensor into its mounting hole
.
Step 7: Route the sensor wire along the correct path
.
Step 8: Connect the sensor connector to the vehicle connector
.
Step 9: Clear the code and test drive your vehicle.
Shipping
Payment
Service
Note
1.We will ship your order within
2
working days after confirming the payment, and most areas will receive delivery within
2-8
working days.
2.All orders will be shipped from our US warehouses and delivered by
USPS
,
UPS
or FedEx.
3.We will deliver the product to the address filled in eBay, if you need to change your address,
please make sure you
tell us the new address within 12 hours after payment
(no delivery to remote areas).
4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,
if there are any problems, contact us immediately
please
.
PayPal preferred.
Other payments accepted by ebay also can be accepted.
1. Products can be returned for no reason within
30
days of receipt
(products to be returned must be in a resalable condition, if they have been used we will not accept the return).
2. If the product does not match the description on the product page, we will exchange or refund the product for free
within
30
days.
3. We offer
one
year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.
If you have any concerns about the product or
before
providing a review or feedback,
please contact us
immediately, we will give a satisfied solution.
Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.