57 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel

Description

Document
Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.Specifications:Material: A3 carbon steelHardness: 58-60HRCNumber of Teeth: 57Outside Diameter: 233mm / 9.17-inchTotal Width: 7mm / 0.28-inchBore Diameter: 20mm / 0.79-inchPitch: 1/2-inch / 12.7mmTooth Width: 7mm / 0.28-inchPackage Content: 1 x Chain Sprocket
Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth, Carbon Steel with Bearing
USD
16.65
24 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel
USD
14.45
14 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 10mm Bore Carbon Steel
USD
8.1
14 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 10mm Bore Carbon Steel
USD
12.8
Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth, Carbon Steel w 2 Insert Bearing
USD
20.65
22 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws
USD
14.62
57 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel
Features:
1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.
2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.
4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
Specifications:
Material: A3 carbon steel
Hardness: 58-60HRC
Number of Teeth: 57
Outside Diameter: 233mm / 9.17-inch
Total Width: 7mm / 0.28-inch
Bore Diameter: 20mm / 0.79-inch
Pitch: 1/2-inch / 12.7mm
Tooth Width: 7mm / 0.28-inch
Package Content:
1 x Chain Sprocket
Hot Item
34 Teeth Sprocket Type B Double Strand 3/8" Pitch, 14mm Bore A3 Carbon Steel
USD 53.6
17 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel with 2 Set Screws
USD 12.65
Idler Sprocket, 10mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Bearing
USD 19.97
24 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel, Keyway with 2 Set Screws
USD 15.63
22 Teeth Sprocket 1/4" Pitch, 17mm Bore Carbon Steel, Keyway with 2 Set Screws
USD 14.92
Payment
We ONLY accept Paypal.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Description
Policy
57 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel
Features:
1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.
2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.
4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
Specifications:
Material: A3 carbon steel
Hardness: 58-60HRC
Number of Teeth: 57
Outside Diameter: 233mm / 9.17-inch
Total Width: 7mm / 0.28-inch
Bore Diameter: 20mm / 0.79-inch
Pitch: 1/2-inch / 12.7mm
Tooth Width: 7mm / 0.28-inch
Package Content:
1 x Chain Sprocket
Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth, Carbon Steel with Bearing
USD
16.65
24 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel
USD
14.45
14 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 10mm Bore Carbon Steel
USD
8.1
14 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 10mm Bore Carbon Steel
USD
12.8
Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth, Carbon Steel w 2 Insert Bearing
USD
20.65
22 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws
USD
14.62
Hot Item
34 Teeth Sprocket Type B Double Strand 3/8" Pitch, 14mm Bore A3 Carbon Steel
USD 53.6
17 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel with 2 Set Screws
USD 12.65
Idler Sprocket, 10mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Bearing
USD 19.97
24 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel, Keyway with 2 Set Screws
USD 15.63
22 Teeth Sprocket 1/4" Pitch, 17mm Bore Carbon Steel, Keyway with 2 Set Screws
USD 14.92
Payment
We ONLY accept Paypal.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
On Jun 22, 2022 at 02:06:26 PDT, seller added the following information: