18 Tooth Sprocket, Double Strand 1/4" Pitch 14mm Bore Carbon Steel with Keyway

Description

Document
Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. The keyway shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: C45 carbon steelFinish: Black OxideNumber of Teeth: 18Outside Diameter: 40mm / 1.57-inchTotal Width: 20mm / 0.79-inchBore Diameter: 14mm / 0.55-inchKeyway Size: 5 x 2.3mm / 0.2 x 0.09-inch(L*W)Pitch: 1/4-inch / 6.35mmTooth Width: 3mm / 0.12-inchPackage Content: 1 x Chain Sprocket
B Type Roller Chain Sprocket 15 Teeth 6mm Bore Stainless Steel Motor Drive Gear
USD
13.78
B Type Roller Chain Sprocket 10 Teeth 8mm Bore Stainless Steel Motor Drive Gear
USD
12.89
B Type Roller Chain Sprocket 9 Teeth 5mm Bore Stainless Steel Motor Drive Gear
USD
12.47
9 Teeth Sprocket Single Strand 1/2" Pitch, 10mm Bore Carbon Steel
USD
9.03
Idler Sprocket, 6mm Bore 1/2" Pitch 12 Tooth, Carbon Steel with 2 Insert Bearing
USD
18.97
Idler Sprocket, 20mm Bore 1/2" Pitch 18 Tooth, Carbon Steel with Insert Bearing
USD
27.62
18 Tooth Sprocket, Double Strand 1/4" Pitch 14mm Bore Carbon Steel with Keyway
Features:
1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. The keyway shaft can be fixed well, which is convenient to use.
2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.
3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
Specifications:
Material: C45 carbon steel
Finish: Black Oxide
Number of Teeth: 18
Outside Diameter: 40mm / 1.57-inch
Total Width: 20mm / 0.79-inch
Bore Diameter: 14mm / 0.55-inch
Keyway Size: 5 x 2.3mm / 0.2 x 0.09-inch(L*W)
Pitch: 1/4-inch / 6.35mm
Tooth Width: 3mm / 0.12-inch
Package Content:
1 x Chain Sprocket
Hot Item
Idler Sprocket, 17mm Bore 1/2" Pitch 17 Tooth, Carbon Steel with Bearing
USD 23.32
Idler Sprocket, 6mm Bore 1/2" Pitch 19 Tooth, Carbon Steel with Insert Bearing
USD 17.51
Idler Sprocket, 12mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Insert Bearing
USD 18.59
20 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel with Set Screws
USD 14.77
B Type Roller Chain Sprocket 14 Teeth 12mm Bore Stainless Steel Motor Drive Gear
USD 13.88
Payment
We accept eBay payment.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Description
Policy
18 Tooth Sprocket, Double Strand 1/4" Pitch 14mm Bore Carbon Steel with Keyway
Features:
1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. The keyway shaft can be fixed well, which is convenient to use.
2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.
3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.
4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
Specifications:
Material: C45 carbon steel
Finish: Black Oxide
Number of Teeth: 18
Outside Diameter: 40mm / 1.57-inch
Total Width: 20mm / 0.79-inch
Bore Diameter: 14mm / 0.55-inch
Keyway Size: 5 x 2.3mm / 0.2 x 0.09-inch(L*W)
Pitch: 1/4-inch / 6.35mm
Tooth Width: 3mm / 0.12-inch
Package Content:
1 x Chain Sprocket
B Type Roller Chain Sprocket 15 Teeth 6mm Bore Stainless Steel Motor Drive Gear
USD
13.78
B Type Roller Chain Sprocket 10 Teeth 8mm Bore Stainless Steel Motor Drive Gear
USD
12.89
B Type Roller Chain Sprocket 9 Teeth 5mm Bore Stainless Steel Motor Drive Gear
USD
12.47
9 Teeth Sprocket Single Strand 1/2" Pitch, 10mm Bore Carbon Steel
USD
9.03
Idler Sprocket, 6mm Bore 1/2" Pitch 12 Tooth, Carbon Steel with 2 Insert Bearing
USD
18.97
Idler Sprocket, 20mm Bore 1/2" Pitch 18 Tooth, Carbon Steel with Insert Bearing
USD
27.62
Hot Item
Idler Sprocket, 17mm Bore 1/2" Pitch 17 Tooth, Carbon Steel with Bearing
USD 23.32
Idler Sprocket, 6mm Bore 1/2" Pitch 19 Tooth, Carbon Steel with Insert Bearing
USD 17.51
Idler Sprocket, 12mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Insert Bearing
USD 18.59
20 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel with Set Screws
USD 14.77
B Type Roller Chain Sprocket 14 Teeth 12mm Bore Stainless Steel Motor Drive Gear
USD 13.88
Payment
We accept eBay payment.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
On Dec 21, 2022 at 15:50:12 PST, seller added the following information: