10 Teeth Sprocket Single Strand 1/2" Pitch, 10mm Bore Carbon Steel

Description

Document
Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelHardness: 58-60HRCNumber of Teeth: 10Outside Diameter: 45mm / 1.77-inchBump Width: 15mm / 0.59-inchTotal Width: 22mm / 0.87-inchBore Diameter: 10mm / 0.39-inchPitch: 1/2-inch / 12.7mmTooth Width: 7mm / 0.28-inchPackage Content: 1 x Chain Sprocket
06B Roller Chain Sprocket 17T Pitch 3/8" 24mm Bore A3 Steel Motor Drive Gear
USD
13.9
06B Roller Chain Sprocket 17T Pitch 3/8" 14mm Bore A3 Steel Motor Drive Gear
USD
15.64
06B Roller Chain Sprocket 17T Pitch 3/8" 15mm Bore A3 Steel Motor Drive Gear
USD
15.36
06B Roller Chain Sprocket 15T Pitch 3/8" 20mm Bore A3 Steel Motor Drive Gear
USD
13.42
06B Roller Chain Sprocket 15T Pitch 3/8" 16mm Bore A3 Steel Motor Drive Gear
USD
13.99
06B Roller Chain Sprocket 14T Pitch 3/8" 16mm Bore A3 Steel Motor Drive Gear
USD
12.76
10 Teeth Sprocket Single Strand 1/2" Pitch, 10mm Bore Carbon Steel
Features:
1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.
2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.
4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
Specifications:
Material: A3 carbon steel
Hardness: 58-60HRC
Number of Teeth: 10
Outside Diameter: 45mm / 1.77-inch
Bump Width: 15mm / 0.59-inch
Total Width: 22mm / 0.87-inch
Bore Diameter: 10mm / 0.39-inch
Pitch: 1/2-inch / 12.7mm
Tooth Width: 7mm / 0.28-inch
Package Content:
1 x Chain Sprocket
Hot Item
06B Roller Chain Sprocket 15T Pitch 3/8" 18mm Bore A3 Steel Motor Drive Gear
USD 13.69
Idler Sprocket, 20mm Bore 1/2" Pitch 18 Tooth, Carbon Steel with Insert Bearing
USD 23.1
Idler Sprocket, 8mm Bore 1/4" Pitch 19 Tooth, Carbon Steel with Insert Bearing
USD 13.71
9 Teeth Sprocket Single Strand 3/8" Pitch, 8mm Bore Carbon Steel
USD 7.54
Idler Sprocket, 17mm Bore 1/2" Pitch 17 Tooth, Carbon Steel with Bearing
USD 21.89
Payment
We accept eBay payment.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Description
Policy
10 Teeth Sprocket Single Strand 1/2" Pitch, 10mm Bore Carbon Steel
Features:
1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.
2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.
3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.
4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
Specifications:
Material: A3 carbon steel
Hardness: 58-60HRC
Number of Teeth: 10
Outside Diameter: 45mm / 1.77-inch
Bump Width: 15mm / 0.59-inch
Total Width: 22mm / 0.87-inch
Bore Diameter: 10mm / 0.39-inch
Pitch: 1/2-inch / 12.7mm
Tooth Width: 7mm / 0.28-inch
Package Content:
1 x Chain Sprocket
06B Roller Chain Sprocket 17T Pitch 3/8" 24mm Bore A3 Steel Motor Drive Gear
USD
13.9
06B Roller Chain Sprocket 17T Pitch 3/8" 14mm Bore A3 Steel Motor Drive Gear
USD
15.64
06B Roller Chain Sprocket 17T Pitch 3/8" 15mm Bore A3 Steel Motor Drive Gear
USD
15.36
06B Roller Chain Sprocket 15T Pitch 3/8" 20mm Bore A3 Steel Motor Drive Gear
USD
13.42
06B Roller Chain Sprocket 15T Pitch 3/8" 16mm Bore A3 Steel Motor Drive Gear
USD
13.99
06B Roller Chain Sprocket 14T Pitch 3/8" 16mm Bore A3 Steel Motor Drive Gear
USD
12.76
Hot Item
06B Roller Chain Sprocket 15T Pitch 3/8" 18mm Bore A3 Steel Motor Drive Gear
USD 13.69
Idler Sprocket, 20mm Bore 1/2" Pitch 18 Tooth, Carbon Steel with Insert Bearing
USD 23.1
Idler Sprocket, 8mm Bore 1/4" Pitch 19 Tooth, Carbon Steel with Insert Bearing
USD 13.71
9 Teeth Sprocket Single Strand 3/8" Pitch, 8mm Bore Carbon Steel
USD 7.54
Idler Sprocket, 17mm Bore 1/2" Pitch 17 Tooth, Carbon Steel with Bearing
USD 21.89
Payment
We accept eBay payment.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.